Energy-saving PIR lamp with sensor charged via USB port
The lamp has a multifunctional use. Ideally suited as lighting in the corridor, in the wardrobe, lockers, by the bed, bathroom, over the mirror and many other spaces. The lamp can also be used as a portable light.
The lamp is available in 3 sizes - depending on the application and we can choose the perfect one for ourselves!
The lamp has a built-in lithium-polymer battery, so we do not need a battery to power it. It is mounted in a very easy way shown in the pictures. It has a magnet strip that we stick to the selected surface and to this strip we attach a lamp that also has a magnet tape.
In order to charge the lamp, pull the lamp and without any problems or damage to the wall, for example, move it to the selected place to connect to the power source.
The lamp shines with light: white, neutral, warm or the brightest, which is a combination of all the LEDs.
It has a light dimmer function. The lamp will turn on by detecting movement within 3-4 meters with an angle of 120 degrees. The lamp has a sensor thanks to which it will turn on after detecting movement only when the environment is dark, and therefore it will not turn on during the day or in an environment where the light is on. When the lamp turns on and stops detecting movement, it will automatically turn off after 13 seconds. However, it also has a permanent job function. By pressing the ON button on the side of the lamp, the lamp will run until we turn it off.
Magnetic TRACER LED lamp with a PIR sensor is ideally suited as lighting in the corridor, in the wardrobe, lockers, by the bed, bathroom, over the mirror and many other spaces. The lamp can also be used as a portable light.
Power (W): 0.7
Voltage (V): DC 5V 0.5A
Illuminance: 70 lm
Colour temperature (K): 3000 — 6500
Battery (mAh): 800mAh / Li-Po 3.7V
Size: 35 x 3.5 x 1 cm
Light source: Non-replaceable light source: 3528 SMD x 60 pcs. diodes
Weight: 161 g
PIR sensor - motion detection