The Ventum VT4V Evo TG ARGB housing features a high airflow provided by the open front panel as well as four backlit Stella HP ARGB 120 mm CF high pressure fans. The Ventum VT4V Evo TG ARGB has a spacious design that accommodates 345 mm graphics cards and a 159 mm high CPU air cooling system. A liquid cooling system (AIO) in 240 or 280 sizes fits seamlessly above or in front of the case. Fresh air enters through a ventilated front with numerous 0.9 mm diameter apertures. This makes the SilentiumPC Ventum VT4V Evo TG ARGB the perfect base even for high-performance computers equipped with e.g. 12-core, high-impact CPUs and modern graphics cards with increased TDP and an extensive cooling circuit.Exceptionally high airflowProper ventilation of the Ventum VT4V EVO TG ARGB case interior and low temperatures of the installed components are ensured thanks to the specially designed open front with ultra-high airflow and four high-pressure Stella HP ARGB 120 mm CF fans.ARGB LED backlighting systemThe SilentiumPC Ventum VT4V Evo TG ARGB housing is equipped with a set of four high-pressure fans: Stella HP ARGB 120 mm CF. Three of them are mounted on the front of the casing and the fourth one on the rear wall. They generate not only high airflow but also high pressure, which helps to keep the inside of the computer clean. The set includes an advanced controller of addressable LED backlighting - Nano-Reset ARGB - with several dozen modes: different effects, set colours. The set also includes a splitter for a total of 5 ARGB devices and 5 fans, which enables them to be connected to one socket in the controller or motherboard.Lighting controller: Nano-Reset ARGBThe Ventum VT4V Evo TG ARGB case comes with an advanced ARGB LED controller – Nano-Reset ARGB – which supports several dozen eye-catching modes. The ARGB (5V) LED system is fully compatible with other SilentiumPC ARGB devices. These include liquid AIO coolers - Navis Evo ARGB, air coolers with an ARGB backlight, Aurora Stripes ARGB LED strips as well as Stella and Corona ARGB fans.ARGB and PWM splitterThe Ventum VT4V Evo TG ARGB case has a splitter for a total of 5 ARGB devices and 5 fans, which allows them to be connected to one socket on the controller or motherboardWindowed side panelThe large side panel made of tempered glass provides a perfect view of the components inside your Ventum VT4V Evo TG ARGB case.AIO LC compatibilityThe user can also install an integrated liquid cooling system (AiO) on the processor. Ventum VT4V Evo TG ARGB will accommodate 120/140/240 or 280 mm radiators both at the front and under the top of the case. The top of the case has been raised so that the AiO radiator suspended under it doesn't interfere with the motherboard, and thus the RAM modules installed on it.I/O panel: 2× USB 3.2 Gen 1All the important ports and buttons at your fingertips – 2 × USB 3.2 Gen1 (3.0), audio ports and POWER and RESET buttons.2× 3,5”3× 2,5”SSD mounts behind the motherboardThe lower chamber and service bay of the Ventum VT4V Evo TG ARGB provides space for two 3.5" disks - mounted with vibration-reducing rubber screws - and three 2.5" carriers bolted to the rear of the partition in special channels.Dust filtersA set of dust filters – under the power supply and on the top of the case, conveniently mounted in a magnetic frame – as well as a specially designed front panel with small openings about 0.9 mm in diameter protect the computer from getting dirty. Simply wipe it off with a cloth to remove the layer of dust caught there. Air can flow freely through these openings, which effectively lowers the temperature of the components mounted inside the Ventum VT4V Evo TG ARGB case.
