Kompiuterio korpusas Kolink, juoda sp.

Prekės aprašymas anglų kalba:Noise is an annoying side effect that is caused not only at the airport by aircraft taking off and in traffic by passing trucks. Especially in your own home, therefore, many people strive to provide peace, to find relaxation. Unfortunately, the PC is in many cases contrary to these efforts and annoying during operation with high noise.

The sources of noise are initially all rotating components, which mainly affects fans and hard drives. These should be decoupled and, if necessary, the speed reduced. Many housings support these measures and already offer ex works equipment.

In addition, an insulation can provide even lower external noise. With this modified version of the Kolink Punisher RGB both approaches are connected and the housing is equipped with a pre-installed insulation.

The special feature of this compilation is that in addition to the pre-installed insulation mats, additional insulation material included. This is also tailored to fit and allows additional sealing of other housing parts. As a result, you have the choice of how much insulation you use to achieve an individual optimum of cooling and volume reduction.

When delivered, the Kolink Punisher RGB has been fitted with insulating mats at all mandatory locations to reduce component noise. These include the right side panel, the floor and the middle back. Three more mats are loosely in the housing. These are also tailored to fit and can be installed as needed. They are intended for the front, the lid and the upper back.

All additional insulation mats are labeled, which together with an enclosed installation manual ensures trouble-free installation. The manual is specially tailored to the requirements of the Kolink Punisher RGB and explains in detail the installation, gives practical tips and explains the possibilities and insulation options.

Function: The insulating mats achieve a noise reduction via two effects. First, the soft material absorbs airborne vibrations. At the same time, the mats reduce self-propagating vibrations via the housing, above all by their own weight. Both together ensure that the outer sides of the case are hardly stimulated to vibrate. In addition, the installed fans should be throttled with the built-in control.

Note:Please note that due to the insulating mats the space inside the housing may be lower. Under certain circumstances, the laying of cables behind the mainboard tray can only be limited in comparison to the uninsulated version.

Technical details:

• Kolink Punisher RGB Midi-Tower, black Window - insulated
• Dimensions: 263 x 539 x ​​400 mm (W x H x D)
• Material: steel (body), plastic (front)
• Weight: about 6 kg
• Color: Black
• Form factor: ATX, Micro-ATX, Mini-ITX
• Total possible fan:
  2x 120 mm (front)
  2x 120 mm (cover)
  1x 120 mm (back)
• Pre-installed:
  1x 120 mm (back)
  2x 120 mm (front, RGB LEDs)
• Radiator mountings:
  1x max. 240 mm (cover)
  1x 120 mm (back)
  1x max. 240 mm (front)
• Drive bays:
  1x 5.25 inches (external)
  2x 3.5 inches max. (internal)
  2x 2.5 inches max. (internal)
• Power supply: 1x standard ATX (optional)
• Expansion Slots: 7
• I / O-Panel:
  2x USB 3.0
  1x USB 2.0
  1x each Audio In / Out
  1x Card-Reader (TF, SD)
  1x fan control (3-pin, 4 ports)
• Maximum graphics card length: 390 mm
• Maximum CPU cooler height: 170 mm
• Maximum PSU length: 240 mm
• Insulation (pre-assembled):
  1x side panel (right)
  1x floor
  1x back (center)
• Insulation (included):
  1x front
  1x cover
  1x back (top)