Name: Kompiuterio korpusas AeroCool Beam-G-BK-v2, juoda sp.
Brand: AeroCool
Price: 79.9 EUR
Availability: OutOfStock

Prekės informacija

Bendrosios charakteristikos

Prekės tipas

Kompiuterio korpusai

Prekės ženklas

AeroCool

Modelis

Beam-G-BK-v2

Korpuso dydis

Mid tower (ATX)

Medžiaga

ABS plastikas, Grūdintas stiklas, Plienas

Spalva

Juoda sp.

Integruotas maitinimo blokas (PSU)

Išplėtimo galimybės

2.5 colio skyrių skaičius

3.5 colio skyrių skaičius

5.25 colio skyrių skaičius

Priekinio skydelio jungtys

Jungtys

2 x USB 2.0, Audio In, Audio Out, USB 3.0

Matmenys ir svoris

Plotis

21 cm

Gylis

40.4 cm

Aukštis

48.15 cm

Papildomai

Foninis apšvietimas

Taip

Privaloma garantija

24 mėn

Pastebėjai klaidą prekės aprašyme, savybių lentelėje ar nuotraukų galerijoje? Pranešk mums

Prekės atspalvis gali skirtis nuo matomo nuotraukoje.

Airflow-optimized Midi-Tower with Tempered-Glass
With aerocool's Beam-G-BK-V2, you don't compromise when it comes to cooling your components. It is equipped with a power supply shaft and is optimally prepared for air and water cooling through the openings in the front.The

side panel is made of tempered glass and allows a good view of the installed components. With the vertical expansion bays, graphics cards can be easily mounted vertically with the help of an optional riser cable. With the I/O panel, you have easy access to the data and audio ports.

Outstanding airflow and dual-chamber design
When developing the Beam-G-BK-V2, Aerocool focused from the outset on cooling the components. The housing is very open and designed for trouble-free airflow. The front has a mesh in the form of a perforated grille and thus ensures an unhindered air flow. The three 120 mm FRGB fans behind it ensure sufficient fresh air supply, another integrated 120 mm fan on the back transports the heated air out of the case.

At the front there is space for either 3x 140 mm fans or 3x 120 mm fans. On the lid 2x 120 mm or 2x 140 mm and on the back a 120 mm fan. Dust filters that are easy to clean against dust are also attached to the lid and floor.

The power supply cover shields the power supply from the rest of the chassis. This ensures that the waste heat from the power supply does not enter the main chamber of the case, where the other warm components are located and thus lower temperatures are achieved inside the housing. For further cooling, there is space on the lid of the power supply bay for two 120 mm fans, which can provide generally better ventilation of the hot air in the case due to their airflow.

Sufficient space for water cooling and components
The Beam-G-BK-V2 offers the possibility to install ATX, Micro-ATX and Mini-ITX motherboards. Thus, you have a large selection of platforms and configurations. In addition, CPU coolers up to a height of 160 mm and high-end graphics cards can be accommodated up to a maximum length of 343 mm without a radiator at the front. If you are planning to install water cooling, you will not be disappointed here either. In the front there is enough space for a 360 mm radiator. Radiators up to a size of 280 mm and a maximum height of 53 mm can be placed at the top of the housing. The back offers the possibility to use a 120 mm radiator, for example for small all-in-one water cooling.

Plenty of space and simple design
You don't have to worry about enough mounting options for your storage media with this case either. Two 3.5- or two 2.5-inch data carriers can be accommodated under the power supply cover. Two 2.5-inch drives can then be mounted on the motherboard tray. Thus, enough memory is available for every area of application. For power-hungry hardware, optional ATX power supplies up to 189 mm in size (with cables) can be placed under the cover.

The simple, black design of the Beam-G-BK-V2 makes it possible to build even inconspicuous builds with good cooling performance. The housing is made of hardened, 0.5 mm thick SPCC steel, which gives the case its robustness. The side panel is made of tempered glass, which is why it provides a good view of the internal components. Thus, nothing stands in the way of an eye-catching RGB build. The I/O panel does not let fans of mobile data carriers down. It comes with power button, reset button, HD audio and microphone port, as well as two USB 2.0 and one USB 3.0 Type-A port for faster transfer of files.